DBS Parts Guide: Aston Martin DBS Spares by Generation - SuperCars.Parts

DBS Parts Guide: Aston Martin DBS Spares by Generation

Two Aston Martin DBS generations in a garage

The right DBS part starts with the right DBS. Aston Martin has used the name on three different cars, and almost nothing interchanges between them. Pin down your generation, body style, engine and gearbox first. Then match the part number, and only then compare condition and price. This guide walks through that order and shows where to look for each generation.

Supercars
Find the Right Parts for Your DBS
Search a marketplace focused on exotic and supercar parts, with AI-driven search to help locate components for your Aston Martin DBS.
Visit

TL;DR

  • “DBS” covers three separate cars: the 1967–1972 original, the 2007–2012 V12 coupe and Volante, and the 2018–2024 Superleggera. Parts do not carry across generations.
  • Identify the car before the part: generation, body style, gearbox, VIN and the part number on the old component.
  • Original, OEM, aftermarket and used parts each have a place. Choose by how the car is used, not by price alone.
  • Rare or discontinued items are usually found through specialist marketplaces, dismantlers and owner networks, so verify photos, numbers and history.
  • Before you pay, confirm fitment in writing, ask for documentation, and read the return terms.

Table of Contents

Which DBS do you own? Three generations, three parts catalogs

A search for “DBS spares” returns very different cars depending on the year. Aston Martin has used the name for three models: the first generation from 1968 to 1972, a second generation from 2008 to 2018, and a third that debuted for 2019 with a V12. Catalog data on our site dates the middle car from 2007, which is when it was announced and first built, so you will see both years in listings.

Generation Years Engine Body styles Typical parts needs
First (DBS, DBS V8) 1967–1972 Inline-six, later V8 Coupe Trim, chrome, switchgear, mechanical rebuild items
Second 2007–2012 on our catalog 5.9 L V12, 510 hp Coupe, Volante Brakes, clutch, suspension, carbon body panels
Third (Superleggera) 2018–2024 5.2 L twin-turbo V12 Coupe, Volante Carbon panels, wheels, aero, electronics

The tricky part is that three catalogs share one name. A listing titled “DBS door handle” is meaningless until you know which car it came from. Our site separates them by generation, body style, engine and gearbox for exactly that reason.

First generation: 1967–1972

The original DBS was produced from September 1967 to April 1972, roughly 800 cars in total. The V8 arrived in 1969 to create the DBS V8, and Series 2 cars followed in 1970. For parts, that means three things to separate: the inline-six car, the V8 car and the Series 2 revisions. Our catalog lists the DBS coupe with the 4.0 inline-six and manual gearbox from this era.

First-generation DBS production timeline and milestones

With so few cars built, new-old-stock and good used parts matter most here. Many items are one-offs or small-batch reproductions.

Second generation: the V12 DBS

The 5.9 L V12 DBS made 510 hp and was sold with a manual or an automatic. That choice changes the parts you need, especially for the clutch, flywheel and driveline. Pick the right variant before searching:

The Volante body style adds a roof mechanism and different structural and trim parts. Always say which body you have when you ask a seller about an item.

Third generation: DBS Superleggera and 770 Ultimate

The DBS Superleggera (model code AM7) was built from 2018 to 2024 as a coupe and a Volante convertible. It uses a 5.2 L twin-turbo V12 making 725 PS (715 hp), or 770 PS (759 hp) in the DBS 770 Ultimate. The 770 Ultimate was limited to 499 units, and the 007 Edition to just 25. Aston Martin’s launch announcement gives 900 Nm of torque and 180 kg of downforce at top speed, the highest figure for a series production Aston Martin at that time. Aero parts, in other words, are functional, and the wrong substitute is not just a cosmetic mismatch.

Browse by exact variant:

Do not confuse these with the DB12, the current Aston Martin grand tourer. It has its own catalog and shares no parts listings with the DBS.

How to identify the correct part

A part that looks right and fits wrong costs more than the part itself, particularly when it is carbon fiber or a painted panel. Work through this sequence.

  1. Write down the car’s identity. Generation, body style (coupe or Volante), engine, gearbox, model year and market (US, UK or other). Market matters because lighting, emissions hardware and some electronics differ by specification.
  2. Use the VIN. The 17-character VIN, or the older chassis number on first-generation cars, ties the car to its build. Send it to the seller and ask them to confirm fitment against it. Decoder websites can help you read a VIN, but treat them as a starting point and confirm with a specialist or the seller.
  3. Find the part number on the old part. Many components carry a casting, label or stamped number. Photograph it before you remove the part, with the surrounding area in frame.
  4. Cross-check the number. Compare the number you have with the listing. Superseded numbers are common on cars of this age, so ask whether the listed number replaces yours, and in which direction.
  5. Match the photos to your old part. Mounting points, connectors, hose diameters and bracket positions tell you more than a title does.

Our AI parts search is built for the first steps of this process. You describe the part or paste what you know, and it narrows the catalog to likely matches within the listings for your car. It saves time on hard-to-name items, and you still confirm the final part number with the seller.

Types of parts and when each fits

The vocabulary around parts is loose, so define it before you buy.

Type What it is Good fit when
Original / genuine Made by or for the manufacturer, in the original packaging or marked as such Concours restoration, tight-tolerance mechanical items
OEM Made by the supplier that built the part for the manufacturer Wear items where you want original specification
Aftermarket Made by a third party to fit, often with changed specifications Performance upgrades, hard-to-source items
Used Taken from another car Trim, panels, body hardware, items no longer produced
Rebuilt or remanufactured Used core, restored to specification Calipers, pumps, electronics, steering racks
Reproduction New part made to replicate an original Older cars where originals are gone

Both OEM and aftermarket parts are part of the catalog on our marketplace, so you can compare them side by side.

Choosing by use

Weekend driver or collector car. Favor original or OEM parts, and keep the old ones when you can. Originality shapes how enthusiasts value the car.

Frequent driver. OEM or good aftermarket items for brakes, suspension and cooling are sensible. These parts wear, and you want them predictable.

Restoration. Mix by category: reproduction or used items for trim and chrome, rebuilt units for mechanical components, and original parts where the finish will be judged.

Body repair. Used carbon-fiber or aluminum panels from a donor car can save weeks over fabrication. Check for repair history, fiber damage and paint thickness.

What to check on the common DBS wear items

A published buying guide for the second-generation car tells buyers to concentrate on service history, carbon-ceramic brake condition, clutch or transmission health, cooling, dampers, electrical systems and carbon-fiber body damage. Those are also the areas where parts questions arise.

  • Clutch and flywheel (manual V12). The same guide notes that some cars use later twin-plate conversions and that invoices should explain the parts used. When buying a clutch kit, ask which version it is and whether it suits your car’s current setup.
  • Carbon-ceramic brakes. Discs are expensive, so condition matters on used items. Look for edge chips, surface damage and wear indicators, and ask for measurements.
  • Dampers and suspension. Adjustable and standard setups differ. Confirm which one your car has.
  • Cooling. Hoses, radiators and coolant components on a V12 are tightly packaged. Matching dimensions and connector types is critical.
  • Electrical items. Modules, switches and sensors often need coding or matching to the car. Ask whether a used module is tied to a VIN.
  • Carbon panels. Check weave alignment, delamination and fit of mounting points.

If you have questions about a repair itself, a technician who specializes in Aston Martin V12 cars is the right person to ask.

Sourcing rare and discontinued spares

On a car with limited production, the part you need may exist in only a few places. A process helps.

Start with a specialist marketplace. Searching a catalog built around exotic cars gives you more relevant results than a general auction site, because listings are tagged by model, generation and engine. Our Aston Martin parts and cars page lists everything by model.

Contact dismantlers and exotic body shops. Many hold stock they have not listed. Give them the VIN, the part number and photos.

Ask owner communities and clubs. Owners who have changed a part sometimes keep the original. Clubs also know which reproduction suppliers have a good reputation.

Consider alternatives that solve the problem. A rebuilt unit or an updated part number may be easier to find than the exact original. Ask a specialist whether a superseded part works with your car.

Verifying provenance and condition

  • Ask for several photos from different angles, including the part number and any damage.
  • Ask which car the part came from, its approximate mileage, and why it was removed.
  • Request documentation: invoices, a donor car’s details or a rebuilder’s record.
  • For rebuilt items, ask what was replaced and what the rebuild covers.
  • For high-value items, ask a specialist technician to review the listing before you pay.

Before you pay: a buyer’s checklist

  1. Fitment confirmed in writing, with your VIN and body style included in the message.
  2. Part number matches, or the supersession is explained.
  3. Condition stated clearly: new, used, rebuilt or reproduction, with photos.
  4. Documentation where it matters, such as paperwork for a rebuilt component.
  5. Warranty and returns read before payment, including who pays shipping on a wrong part.
  6. Shipping method suited to the item. Carbon panels, glass and wheels need proper crating.
  7. Customs and duties if the part crosses a border. Our readers buy worldwide, and rules depend on the destination country, so check the official customs page of yours.

Keep the exchange of messages with the seller. If something does not fit, a clear written record makes resolution straightforward.

Our view: why DBS parts need a dedicated catalog

A DBS owner is rarely looking for a generic part. They are looking for one item that fits one version of one low-volume car, and it may be listed under three different names.

That is why we built the marketplace around exotic and supercar models and added AI-driven search. Our catalog has over 365,000 listings across Ferrari, Lamborghini, McLaren, Aston Martin, Rolls-Royce and other marques. Searching within a single car’s catalog, split by generation, body and gearbox, removes much of the guesswork.

We also let sellers list parts with 0% commission. Our aim is to help dismantlers, body shops and private owners put rare parts in front of the people who need them, which in turn helps buyers find items that might otherwise stay on a shelf.

Our advice is simple: identify the car precisely, work from the part number, and buy from sellers who answer fitment questions clearly. We designed the platform to support that way of buying.

Artem

Find your DBS parts on Supercars.parts

If you own, restore or repair an Aston Martin, start from your exact generation and body style. We list DBS parts, documents and services next to wider Aston Martin parts and cars, and the AI-driven search helps you find an item when you do not know its official name.

Supercars

Workshops, body shops and dismantlers can list parts with 0% commission. If your search covers more than one marque, the full exotic parts catalog is organized in the same way.

FAQ

Do DBS parts fit across the different generations?

Generally, no. The 1967–1972 car, the 2007–2012 V12 coupe and Volante, and the 2018–2024 Superleggera are different designs with different engines. Always confirm fitment against your VIN and body style before ordering.

Are there parts that differ between coupe and Volante?

Yes. The Volante adds a roof mechanism and has different structural, trim and body parts. Mechanical items such as engine components may be shared within a generation, but confirm with the seller using your VIN.

Is a used or aftermarket part acceptable on a DBS?

Often, depending on the part and your goals. Used panels and trim are common choices, and aftermarket or rebuilt parts suit wear items. For a collector car, original or OEM parts help preserve originality.

How do I find a discontinued DBS part?

Search a specialist exotic marketplace using the part number and your car’s details, then contact dismantlers, body shops and owner clubs. Ask whether a superseded or rebuilt part is acceptable for your car.

What should I ask a seller before buying?

Ask for the part number, photos, donor car details, condition, and written confirmation of fitment against your VIN. Read the warranty and return terms before you pay.

Sources

More Articles