| # | OEM | Part name | Offers |
|---|---|---|---|
| 001 | MC18232 | PISTON RING SET | |
| 001 | MC18231 | PISTON RING SET | |
| 001 | 77X15X36 | STANDARD DIAMETER | |
| 002 | 77X15X36 | STANDARD DIAMETER | |
| 003 | 7715X5X33 | 1ST INCREASE | |
| 003 | 7730X5X33 | 2ND INCREASE | |
| 003 | 77X5X33 | STANDARD DIAMETER | |
| 004 | 14844 | PISTON COMPRESSION RATIO 9.3: 1 | |
| 004 | 200802 | STANDARD DIAMETER | |
| 005 | 14671 | BUSH | |
| 006 | 14753 | PIN | |
| 007 | 14672 | RING | |
| 008 | 13233 | DEFLECTOR FOR MOTOR | |
| 010 | 94803 | NUT | |
| 011 | 8R4 | WASHER | |
| 012 | 100454RC | STARTER MOTOR THROW IN COG | |
| 012 | 100454RS | STARTER MOTOR SOLENOID | 2$50–$375 |
| 012 | 100454R | STARTER MOTOR (MARELLI MT 71) | |
| 012 | 100454R | STARTER MOTOR | |
| 012 | 100454R | STARTER MOTOR (MARELLI MT 211) | |
| 013 | 93015 | STUD | |
| 014 | 12R5 | WASHER | |
| 015 | 93859 | NUT | |
| 016 | 100187 | PLATE | |
| 017 | 94851 | BOLT | |
| 018 | 94129 | WHEAT DRIVE | |
| 019 | 14804 | BOLT | |
| 020 | 104011 | SELF LOCKING NUT | |
| 021 | 14938 | ROD ASSEMBLY, WITH BOLTS, NUTS AND BUSH | |
| 022 | 14111 | CON ROD BEARING SET | |
| 023 | 12543 | 1ST UNDER SIZE | |
| 023 | 12543 | CRANKSHAFT | |
| 023 | 12543 | 3RD UNDER SIZE | |
| 023 | 12543 | 3RD UNDER SIZE | |
| 023 | 12543 | 2ND UNDER SIZE | |
| 023 | 12543 | 1ST UNDER SIZE | |
| 023 | 12543 | 2ND UNDER SIZE | |
| 024 | TF4 | PLUG | |
| 025 | 111337 | TERMINAL COVER | |
| 026 | 12569 | ASSEMBLY FLYWHEEL | |
| 027 | 138391 | SEALING RING | |
| 027 | 138391 | SEALING RING | |
| 028 | 12157 | SCREW | |
| 029 | 92987 | PLATE | |
| 030 | 12496 | DAMPER | |
| 031 | 12527 | GEAR CHAIN | |
| 032 | 12526 | GEAR PUMP CONTROL | |
| 033 | 10527 | 2ND UNDER SIZE | |
| 033 | 10527 | 3RD UNDER SIZE | |
| 033 | 10527 | 1ST UNDER SIZE | |
| 033 | 10527 | BEARING FRONT AND REAR | |
| 034 | 10526 | MAIN BEARING | |
| 034 | 10526I | MAIN BEARING ½ SHELL | 1$68 |
| 034 | 10526S | MAIN BEARING ½ SHELL | 1$68 |
| 035 | 100146 | THRUST WASHERS STD | |
| 035 | 10345 | 1ST INCREASE (+ 0.076 MM) | 1$745 |
| 035 | 10345 | 2ND INCREASE (+ 0.101 MM) | 1$745 |
| 035 | 10345 | 3RD INCREASE (+ 0.127 MM) | 1$745 |
This OEM diagram is the property of Ferrari or its respective rights holder. It is provided free of charge for parts identification, maintenance, and repair purposes, consistent with the principles of Fair Use (17 U.S.C. § 107) and Right to Repair. Legal Disclaimer
