| # | OEM | Part name | Offers |
|---|---|---|---|
| 1 | 100117 | ALBERO MOTORE | |
| 1 | 100117 | ALBERO MOTORE | |
| 1 | 100117 | ALBERO MOTORE | |
| 1 | 100117 | ALBERO MOTORE | |
| 2 | 104824 | ASSIEME VOLANO E CORONA | |
| 3 | 100294 | CONTROL GEAR FOR WATER AND OIL PUMP ON CRANKSHAFT | 1$500 |
| 4 | 100196 | DRIVE GEAR FOR TIMING CHAIN | 1$996 |
| 5 | 14326150 | PLUG | |
| 6 | 100185 | CRANK DOWEL | |
| 7 | 102814 | BULIONE FISSAGGIO VOLANO | |
| 8 | 100187 | FLYWHEEL LOCK TAB | |
| 8 | 100187 | LOCK TAB | |
| 9 | 100014 | SEALING RING | |
| 10 | 101297 | CRANKSHAFT SPIGOT BEARING | |
| 10 | 101297 | BEARING ALN15 6202/RS | |
| 11 | 100606 | RING | |
| 12 | 100146 | CRANK THRUST WASHERS STD - 2 PART SET | |
| 12 | 100147 | THRUST WASHER SET 250 2ND OVERSIZE | |
| 12 | 100147 | CRANK THRUST WASHER PAIR 250,275 2ND OVERSIZE 0.25MM | |
| 13 | 100121 | 3RD UNDERSIZE 0.762 MM. ON ? | |
| 13 | 100120 | 2ND UNDERSIZE 0.508 MM. ON ? | |
| 13 | 100119 | 1ST UNDERSIZE 0.254 MM. ON ? | |
| 13 | 100118 | MAIN SHELL 1/2 | 3$68–$336 |
| 13 | 100118 | MAIN SHELL 1/2 | 3$68–$336 |
| 14 | 100122 | LEFT FRONT HALT BEARING | 2$68–$78 |
| 14 | 100123 | 1ST UNDERSIZE 0.254 MM. ON ? | |
| 14 | 100124 | 2ND UNDERSIZE 0.508 MM. ON ? | 2$270–$280 |
| 14 | 100125 | 3RD UNDERSIZE 0.762 MM. ON ? | |
| 14 | 100122 | MAIN SHELL 1/2 | 2$68–$78 |
| 15 | 100129 | 3? MINORAZIONE MM.0.762 SUI ? | |
| 15 | 100128 | 2? MINORAZIONE MM. 0.508 SUL ? | |
| 15 | 100127 | L? MINORAZIONE MM.0.254 SUL ? | |
| 15 | 100126 | SEMICUSCINETTO INTERMEDIO DEST | |
| 15 | 100126 | MAIN SHELL 1/2 | |
| 16 | 100133 | 3? MINORAZIONE MM.0.762 SUL ? | |
| 16 | 100132 | 2? MINORAZIONE MM.0.508 SUL ? | |
| 16 | 100131 | L? MINORAZIONE MM.0.254 SUL ? | |
| 16 | 100130 | SEMICUSCINETTO INTERMEDIO SINI | 1$264 |
| 16 | 100130 | MAIN SHELL 1/2 | 1$264 |
| 17 | 100134 | RIGHT AND LEFT INTERM. HALF BEARING | |
| 17 | 100135 | 1ST UNDERSIZE 0.254 MM. ON ? | 2$66–$200 |
| 17 | 100136 | 2ND UNDERSIZE 0.508F MM. ON ? | |
| 17 | 100137 | 3? MINORAZIONE MM.0.762 SUL ? | |
| 17 | 100134 | MAIN SHELL 1/2 | |
| 18 | 100141 | 3RD UNDERSIZE 0.762 MM. | |
| 18 | 100140 | 2ND UNDERSIZE 0.508 MM. ON ? | |
| 18 | 100139 | 1ST UNDERSIZE 0.254 MM. ON ? | |
| 18 | 100138 | RIGHT REAR HALF BEARING | |
| 18 | 100138 | MAIN SHELL 1/2 | |
| 19 | 100142 | LEFT REAR HALF BEARING | 1$102 |
| 19 | 100143 | 1ST UNDERSIZE 0.254 MM. ON ? | |
| 19 | 100144 | 2ND UNDERSIZE 0.508 MM ON ? | |
| 19 | 100145 | 3RD UNDERSIZE 0.762 MM. | |
| 19 | 100142 | MAIN SHELL 1/2 | 1$102 |
| 20 | 100149 | BIELLA E CAPPELLO | |
| 21 | 100156 | CON ROD BOLT | |
| 22 | 100148 | BIELLA COMPLTTA | |
| 22 | 104011 | BIG END NUT 250 | |
| 22 | 104011 | DO NOT USE - SEE RP11450N | |
| 22 | 104011 | CON ROD NUT | |
| 23 | 100153 | 3RD UNDERSIZE 0.762 MM. ON ? | |
| 23 | 100151 | CON ROD SHELL 250/275 (1) .010 AFTERMARKET | |
| 23 | 100152 | CON ROD SET .020 (330) | |
| 23 | 100150 | CON ROD SET V8 STD. | 3$67–$500 |
| 24 | 100155 | BOCCOLA PER SPINOTTO | |
| 25 | 100174 | RING FOR GUDGEON PIN | |
| 26 | 100173 | SPINOTTO PER PISTONE | |
| 27 | 100172 | 2ND MAGGIORAZIONE + MM 0,30 | |
| 27 | 100169 | 1ST MAGGIORAZIONE + MM 0,15 | |
| 27 | 100165 | PISTON SET STANDARD 81MM 365 | |
| 27 | 100165 | PISTON RING SET 81MM 365 (PER PISTON) | |
| 28 | 81,30x1,5x3,8 | 2ND MAGGIORAZIONE | |
| 28 | 81,15x1,5x3,8 | 1ST MAGGIORAZIONE | |
| 28 | 81x1,5x3,8 | NORMALE | |
| 28 | 100175 | F NORMALE | |
| 29 | 100176 | F NORMALE | |
| 29 | 81x1,5x3,8 | NORMALE | |
| 29 | 81,15x1,5x3,8 | 1ST MAGGIORAZIONE | |
| 29 | 81,30x1,5x3,8 | 2ND MAGGIORAZIONE | |
| 30 | 81,30x5x3 | 2ND MAGGIORAZIONE | |
| 30 | 81,15x5x3 | 1ST MAGGIORAZIONE | |
| 30 | 100177 | F NORMALE |
This OEM diagram is the property of Ferrari or its respective rights holder. It is provided free of charge for parts identification, maintenance, and repair purposes, consistent with the principles of Fair Use (17 U.S.C. § 107) and Right to Repair. Legal Disclaimer
