| # | OEM | Part name | Offers |
|---|---|---|---|
| 0 | 284069 | COMPLETE ENGINE | |
| 1 | 278162 | CRANKCASE-LOWER CRANKCASE SHELL ASSEMBLY -NOT FOR EU GS, UK- | |
| 1 | 281495 | ASSEMBLATO BASAMENTO SOTTOBASAMENTO -No per EU GS, U.K.- | |
| 2 | 236262 | STUD BOLT -M12 X 1.75- -SHANK M10 X 1.25- | |
| 2 | 236261 | STUD BOLT -M12 X 1.75- -SHANK M10 X 1.25- | |
| 3 | 178348 | WASHER D.10.2-20 X 2 | |
| 4 | 134704 | O-RING - ALSO COMES WITH ENGINE GASKET SET | |
| 5 | 176421 | CENTERING DOWEL | |
| 6 | 133988 | NUT | |
| 7 | 217968 | STUD BOLT | |
| 7 | 802590 | STUD BOLT - M 14 X 2 | |
| 8 | 185360 | CENTERING DOWEL | |
| 9 | 13547034 | STUD BOLT - SHANK LENGTH 55 MM | |
| 9 | 13546934 | STUD BOLT - SHANK LENGTH 50 MM | |
| 9 | 254979 | STUD BOLT -SHAFT LENGTH 55 MM- | |
| 10 | 243339 | CYLINDER SLEEVE | |
| 11 | 186251 | O-RING | |
| 12 | 236813 | COMPL. PISTON COOLING NOZZLE | |
| 13 | 262413 | SCREW | |
| 14 | 14454681 | O-RING | |
| 15 | 240214 | GASKET | 2$80–$120 |
| 15 | 242269 | REAR MAIN OIL SEAL | |
| 16 | 175611 | CENTERING DOWEL | |
| 17 | 10304511 | PLUG | |
| 17 | 307477 | THREADED PLUG | |
| 19 | 14325340 | THREADED PLUG | |
| 19 | 282753 | THREADED PLUG | |
| 22 | 231620 | SCREW - M6 X 25 | |
| 23 | 231623 | SCREW - L. 40 MM | |
| 23 | 231625 | SCREW - M6 X 50 | |
| 24 | 255568 | RH ENGINE STRUT | 3$75–$94 |
| 24 | 255569 | LH ENGINE STRUT | 3$75–$94 |
| 25 | 11307034 | SCREW | |
| 26 | 11190574 | WASHER | 1$100 |
| 27 | 259757 | COMPL. LH FLEXIBLE ENGINE MOUNTING BUSH | 100$90–$475 |
| 27 | 259756 | COMPL. RH FLEXIBLE ENGINE MOUNTING BUSH | 97$90–$391 |
| 28 | 263593 | ENGINE MOUNTING BUSH LIMITER BRACKET - LH SIDE | 5$50–$213 |
| 28 | 263594 | ENGINE MOUNTING BUSH LIMITER BRACKET - RH SIDE | 6$50–$213 |
| 28 | 278028 | STAFFA LIMITATRICE ESCURSIONE TAMPONE SX. | |
| 28 | 278027 | STAFFA LIMITATRICE ESCURSIONE TAMPONE DX. | |
| 29 | 243841 | SCREW - M10 X 1.25 X 30 | |
| 30 | 127497 | WASHER | |
| 31 | 14496624 | WASHER - D. 10.5-21 X 2 | |
| 31 | 126648 | WASHER D.10.5-21 X 2 | |
| 32 | 260084 | ENGINE MOUNTING BUSH HEAT SHIELD | 1$60 |
| 33 | 11599534 | SCREW - M12 X 1.75 X 45 | |
| 34 | 127498 | WASHER | |
| 35 | 10738021 | WASHER | |
| 36 | 231616 | SCREW - M6 X 14 | |
| 36 | 248334 | SCREW - M6 X 16 | |
| 37 | 261440 | FRONT COMPL. CRANKCASE COVER | 1$720 |
| 38 | 247049 | BEARING | |
| 39 | 11060276 | SEEGER RING | |
| 40 | 187718 | BLEED PLUG | |
| 41 | 10284460 | GASKET | |
| 41 | 127497 | WASHER | |
| 42 | 253102 | FRONT COVER GASKET -APPLICABLE UNTIL DEPLETION- | 1$75 |
| 43 | 231617 | SCREW - M6 X 18 | |
| 43 | 231626 | SCREW - M6 X 70 | |
| 43 | 231625 | SCREW - M6 X 50 | |
| 43 | 231624 | SCREW - M6 X 45 | |
| 43 | 231622 | SCREW - M6 X 35 | |
| 43 | 231621 | SCREW - M6 X 30 | |
| 43 | 231619 | SCREW - M6 X 22 | |
| 43 | 231620 | SCREW - M6 X 25 | |
| 44 | 236143 | GASKET | |
| 45 | 249747 | ANGULAR SPEED SENSOR | 2$250–$289 |
| 46 | 231618 | SCREW - M6 X 20 | |
| 46 | 231619 | SCREW - M6 X 22 | |
| 47 | 245884 | CRANKSHAFT SEAL | 2$53–$120 |
| 48 | 253787 | CONNECTOR | |
| 49 | 183010 | O-RING | |
| 50 | 223405 | PLUG | |
| 51 | 193885 | PLUG | |
| 53 | 239437 | WATER INLET BUSH | |
| 54 | 255866 | PUMP DRIVE JOINT |
This OEM diagram is the property of Ferrari or its respective rights holder. It is provided free of charge for parts identification, maintenance, and repair purposes, consistent with the principles of Fair Use (17 U.S.C. § 107) and Right to Repair. Legal Disclaimer
