| # | OEM | Part name | Offers |
|---|---|---|---|
| 1 | 319256 | CRANKCASE-LOWER CRANKCASE SHELL ASSEMBLY -APPLICABLE UP TO ENGINE NO. 338904- | |
| 1 | 339292 | CRANKCASE-LOWER CRANKCASE SHELL ASSEMBLY -APPLICABLE FROM ENGINE NO. 338905- | |
| 2 | 312806 | LH PLUG | |
| 2 | 312805 | RH BUSHING | 2$100–$142 |
| 3 | 324057 | ENGINE STRUT | 1$60 |
| 4 | 263594 | ENGINE MOUNTING BUSH LIMITER BRACKET - RH SIDE | 6$50–$213 |
| 4 | 263593 | ENGINE MOUNTING BUSH LIMITER BRACKET - LH SIDE | 5$50–$213 |
| 5 | 127497 | WASHER | |
| 6 | 14496624 | WASHER - D. 10.5-21 X 2 | |
| 7 | 290127 | SCREW | |
| 8 | 243841 | SCREW - M10 X 1.25 X 30 | |
| 9 | 317217 | CHAIN COOLING NOZZLE ASSEMBLY | |
| 10 | 10738021 | WASHER | |
| 11 | 270464 | STUD BOLT | |
| 12 | 127498 | WASHER | |
| 13 | 11599534 | SCREW - M12 X 1.75 X 45 | |
| 14 | 271564 | STUD BOLT | |
| 15 | 185360 | CENTERING DOWEL | |
| 16 | 247049 | BEARING | |
| 17 | 11060276 | SEEGER RING | |
| 18 | 304792 | SHIELD | |
| 20 | 231620 | SCREW - M6 X 25 | |
| 21 | 231621 | SCREW - M6 X 30 | |
| 22 | 233600 | SCREW - M6 X 12 | |
| 23 | 180137 | TEMPERATURE SENSOR | 6$52–$1,400 |
| 24 | 12644404 | WASHER | |
| 25 | 312059 | CENTERING DOWEL | |
| 26 | 278120 | STUD BOLT | |
| 27 | 298858 | PISTON COOLING NOZZLE ASSEMBLY | |
| 28 | 134705 | GASKET - ALSO COMES WITH ENGINE GASKET SET | |
| 29 | 298859 | PISTON COOLING NOZZLE ASSEMBLY | |
| 30 | 312836 | COMPL. VALVE HOLDER | |
| 31 | 271598 | GASKET - ALSO COMES WITH ENGINE GASKET SET | |
| 32 | 271810 | CYLINDER SLEEVE | |
| 33 | 294153 | GASKET - ALSO COMES WITH ENGINE GASKET SET | |
| 34 | 233600 | SCREW - M6 X 12 | |
| 35 | 282392 | SCREW - M6 X 14 | |
| 37 | 13026924 | SCREW - M6 X 14 | |
| 38 | 339289 | GASKET -CONTACT [email protected] FOR RELATIVE INSTALLATION INSTRUCTIONS- | |
| 39 | 11197774 | WASHER | |
| 40 | 311001 | CENTERING DOWEL | |
| 41 | 103994 | GASKET - ALSO COMES WITH ENGINE GASKET SET | |
| 42 | 304697 | DRIVE JOINT | |
| 43 | 13546734 | STUD BOLT - SHANK LENGTH 40 MM | |
| 44 | 231618 | SCREW - M6 X 20 | |
| 45 | 100052 | CENTERING DOWEL | |
| 46 | 231624 | SCREW - M6 X 45 | |
| 46 | 231623 | SCREW - L. 40 MM | |
| 46 | 231621 | SCREW - M6 X 30 | |
| 47 | 231621 | SCREW - M6 X 30 | |
| 48 | 282753 | THREADED PLUG | |
| 49 | 323886 | WASHER WITH RUBBER LINING -APPLICABLE FROM ENGINE NO. 338905- | |
| 49 | 281725 | GASKET -APPLICABLE UP TO ENGINE NO. 255474- | |
| 50 | 282753 | THREADED PLUG | |
| 51 | 282755 | PLUG | |
| 52 | 178348 | WASHER D.10.2-20 X 2 | |
| 53 | 133988 | NUT | |
| 54 | 282755 | PLUG | |
| 55 | 270465 | STUD BOLT | |
| 56 | 270466 | STUD BOLT | |
| 57 | 269972 | OIL PRESSURE SOLENOID VALVE - NO LONGER SUPPLIED - REPLACED BY 743032 | 1$99 |
| 58 | 328660 | OIL PRESSURE SENSOR | 20$55–$157 |
| 59 | 287273 | ANGULAR SPEED SENSOR - NO LONGER SUPPLIED - REPLACED BY 922805 | 2$58–$70 |
| 60 | 231618 | SCREW - M6 X 20 | |
| 61 | 315493 | SCREW - M4 X 10 | |
| 62 | 291078 | THREADED PLUG - M12 X 11 | |
| 63 | 315493 | SCREW - M4 X 10 | |
| 64 | 307477 | THREADED PLUG | |
| 65 | 339287 | GASKET -ALSO COMES WITH ENGINE GASKET SET- -CONTACT [email protected] FOR RELATIVE INSTALLATION INSTRUCTIONS- | |
| 66 | 306145 | PLUG | |
| 68 | 164400 | THREADED PLUG | 1$110 |
| 69 | 316665 | REAR TIMING COVER -APPLICABLE UP TO ENGINE NO. 297220- | 1$830 |
| 69 | 330563 | REAR TIMING COVER -APPLICABLE FROM ENGINE NO. 322609- | |
| 70 | 240214 | GASKET | 2$80–$120 |
| 71 | 313188 | CRANKCASE GASKET -ALSO COMES WITH ENGINE GASKET SET- -APPLICABLE UP TO ENGINE NO. 297220- | 1$2,500 |
| 71 | 323467 | CRANKCASE GASKET -ALSO COMES WITH ENGINE GASKET SET- -APPLICABLE FROM ENGINE NO. 297221- | |
| 72 | 285494 | SCREW - M8 X 50 | |
| 73 | 231629 | SCREW - M8 X 30 | |
| 75 | 309101 | CONNECTOR | |
| 77 | 280597 | THREADED PLUG -APPLICABLE AFTER DEPLETION OF 10300811- | |
| 78 | 302618 | GASKET - ALSO COMES WITH ENGINE GASKET SET | |
| 79 | 307936 | PLUG | |
| 80 | 178348 | WASHER D.10.2-20 X 2 | |
| 81 | 133988 | NUT | |
| 82 | 314461 | SOLENOID VALVE HEAT SHIELD | |
| 83 | 248334 | SCREW - M6 X 16 |
This OEM diagram is the property of Ferrari or its respective rights holder. It is provided free of charge for parts identification, maintenance, and repair purposes, consistent with the principles of Fair Use (17 U.S.C. § 107) and Right to Repair. Legal Disclaimer
