| # | OEM | Part name | Offers |
|---|---|---|---|
| 1 | 189548 | RH CYLINDER BANK RPM SENSOR | 2$85 |
| 2 | 189540 | LH CYLINDER BANK RPM SENSOR | 3$85–$183 |
| 3 | 14305124 | SCREW -APPLICABLE FOR GD- -NOT FOR F1 GEARBOX- | |
| 4 | 222277 | COMPLETE CLUTCH | 1$4,127 |
| 5 | 16296421 | SCREW | |
| 6 | 216771 | SCREW | |
| 7 | 11194379 | WASHER | |
| 8 | 208102 | COMPLETE CLUTCH HOUSING | 2$600–$2,500 |
| 8 | 195080 | CLUTCH HOUSING -NOT AVAILABLE AS SPARE PART- -WITH COMPLETE CLUTCH HOUSING- | |
| 9 | 13546334 | STUD BOLT | |
| 10 | 13028324 | SCREW - M8 X 16 | |
| 12 | 144441 | CLUTCH HOUSING COVER | |
| 13 | 182963 | STOP RING | |
| 14 | 10519378 | SPRING WASHER 5MM | |
| 15 | 238716 | OIL DELIVERY PIPE | |
| 17 | 236806 | CLUTCH SHAFT | |
| 18 | 236804 | INTERMEDIATE FLANGE | |
| 19 | 238714 | VENT PIPE | |
| 20 | 182952 | FLANGE FOR HYDRAULIC CONTROL | 1$840 |
| 21 | 12601274 | WASHER - D. 6.40-12 X 0.5 | |
| 22 | 182963 | STOP RING | |
| 23 | 236805 | HOSE | |
| 24 | 238712 | STUD BOLT | |
| 25 | 10902624 | SCREW - M6 X 25 - NO LONGER SUPPLIED - REPLACED BY 971623 | |
| 26 | 11197774 | WASHER | |
| 27 | 234943 | THRUST BEARING -APPLICABLE FROM ASS. NO. 75200- -APPLICABLE FOR F1 GEARBOX- -APPLICABLE AFTER DEPLETION OF 208310- | 3$1,233–$8,079 |
| 28 | 181838 | SEAL RING | 1$8,079 |
| 29 | 208014 | RING | 1$8,079 |
| 30 | 181837 | SCRAPER RING | 1$8,079 |
| 31 | 181828 | SEAL RING | 1$8,079 |
| 33 | 181836 | SCRAPER RING | 1$8,079 |
| 34 | 14158570 | FLEXIBLE PIN | |
| 36 | 229603 | TIMING SENSOR SHIELD -APPLICABLE FOR F1 GEARBOX- -APPLICABLE AFTER DEPLETION OF 204862- | 1$95 |
| 37 | 10977824 | SCREW | 4$80–$400 |
| 38 | 12601174 | WASHER -VALID FROM ASS. NR. 52556- | |
| 39 | 13540824 | STUD BOLT | |
| 40 | 155177 | STUD BOLT | |
| 41 | 205046 | SPACER | |
| 42 | 200137 | MOUNTING | |
| 43 | 12639724 | WASHER | |
| 45 | 11199274 | WASHER | |
| 48 | 12601374 | WASHER D.8.40-15 X 0.8 | |
| 49 | 146654 | MOUNTING | |
| 50 | 202266 | GROUND BRAID | |
| 52 | 11199274 | WASHER | |
| 53 | 240774 | CONNECTOR | 1$102 |
| 54 | 243784 | COMPLETE SENSOR KIT -CONSISTS OF SENSOR + CABLE GROMMET, REF. 56 AND MAGNET, REF. 62- -APPLICABLE FROM ASS. NO. 58177- -APPLICABLE FOR F1 GEARBOX- -APPLICABLE FROM ENGINE NO. 91307- | 4$100–$366 |
| 55 | 10398480 | CABLE GROMMET -NOT SUPPLIED- -SUPPLIED WITH 243784- | |
| 56 | 14303324 | SCREW - M4 X 20 | |
| 57 | 10519224 | WASHER | |
| 58 | 207447 | SENSOR MOUNT | 2$108–$255 |
| 59 | 14304424 | SCREW - M5 X 25 | |
| 60 | 166676 | PIN. | |
| 62 | 165658 | O-RING | |
| 63 | 167802 | PLUG | |
| 64 | 199410 | HOSE | |
| 65 | 10261060 | GASKET - ALSO COMES WITH ENGINE GASKET SET | |
| 66 | 12647801 | WASHER | |
| 67 | 149694 | PIPE FASTENER BRACKET | |
| 69 | 12639724 | WASHER | |
| 70 | 10441590 | BRACKET WITH SHEATH | |
| 72 | 12639724 | WASHER | |
| 73 | 247023 | CONNECTOR FASTENER BRACKET | |
| 74 | 187161 | FASTENER CLIP -APPLICABLE FOR F1 GEARBOX- | |
| 75 | 203294 | PRESSURE SENSOR | 2$186–$230 |
| 76 | 12647801 | WASHER | |
| 77 | 12647601 | WASHER - D. 6.45-16 X 2 - NO LONGER SUPPLIED | |
| 78 | 221379 | PRESSURE SENSOR WIRING HARNESS | |
| 79 | 140605 | GASKET | |
| 80 | 234059 | SHIELD | |
| 81 | 14048111 | NUT | |
| 83 | 234061 | RUBBER PIPE | |
| 84 | 13431570 | HOSE COLLAR | |
| 85 | 234100 | BRACKET | |
| 87 | 14048111 | NUT | |
| 88 | 12601274 | WASHER - D. 6.40-12 X 0.5 | |
| 89 | 236976 | HEAT SHIELD SHEATH | 2$108–$220 |
| 90 | 206739 | CLAMP | |
| 91 | 16286124 | SCREW - M6 X 20 |
This OEM diagram is the property of Ferrari or its respective rights holder. It is provided free of charge for parts identification, maintenance, and repair purposes, consistent with the principles of Fair Use (17 U.S.C. § 107) and Right to Repair. Legal Disclaimer
