| # | OEM | Part name | Offers |
|---|---|---|---|
| 001 | 105623 | CRANKSHAFT | 2$650–$3,840 |
| 002 | 14326150 | PLUG | |
| 003 | 100119 | 1ST UNDERSIZE 0,254 MM. ON Ø | |
| 003 | 100120 | 2ND UNDER SIZE 0.508 MM. Ø ON | |
| 003 | 100118 | UPPER HALF BEARING | 3$68–$336 |
| 004 | 100123 | 1ST UNDERSIZE 0,254 MM. ON Ø | |
| 004 | 100124 | 2ND UNDER SIZE 0.508 MM. Ø ON | 2$270–$280 |
| 004 | 100122 | LOVER HALF BEARING | 2$68–$78 |
| 005 | 104025 | 2ND UNDER SIZE 0.508 MM. Ø ON | 4$56–$100 |
| 005 | 104023 | HALF BEARING, UPPER AND LOWER | 4$56–$100 |
| 005 | 104024 | 1ST UNDERSIZE 0,254 MM. ON Ø | 4$56–$100 |
| 006 | 100147 | 2ND OVERSIZE 0,25 MM. | |
| 006 | 100146 | SHIM FOR REAR SUPPORT | |
| 006 | 113984 | 1ST OVERSIZE 0,127 MM. | 2$60–$80 |
| 007 | 10206020 | TONGUE | |
| 008 | 109738U | CONNECTING ROD, COMPLETE | |
| 009 | 109738U | CONNECTING ROD AND CAP | |
| 010 | 100156 | BOLT SECURING CON. ROD | |
| 011 | 104011 | NUT FOR CON. ROD BOLT | |
| 012 | 106183 | CON. ROD HALF BEARING | |
| 012 | 100151 | 1ST UNDERSIZE 0,254 MM. ON Ø | |
| 012 | 100152 | 2ND UNDER SIZE 0.508 MM. Ø ON | |
| 013 | 107100 | BUSH FOR GUDGEON PIN | |
| 014 | 104487 | GUDGEON PIN - FOR BORGO PISTON | |
| 014 | 119537 | GUDGEON PIN - FOR MAHLE PISTON | |
| 015 | 100174 | RING FOR GUDGEON PIN | |
| 016 | 119538R | PISTON WITH PISTON RING | |
| 016 | 119538M | PISTON WITH RINGS (COMPETITION) | |
| 016 | 119538R | PISTON WITH RINGS (USA) | |
| 017 | 117655 | DRIVING SPROCKET FOR TIMING SYSTEM | |
| 017 | 119539 | SET OF PISTONS RINGS - FOR MAHLE PISTON | |
| 018 | 119534 | AC CONICAL SEAL RING (1ST- 2ND GROOVE) | |
| 018 | 123710 | AC CONICAL SEAL RING (1ST- 2ND GROOVE) | |
| 019 | 119535 | ROF SCRAPER RING WITH SPRING (3TD GROOVE) | |
| 019 | 123711 | ROF SCRAPER RING WITH SPRING (3TD GROOVE) | |
| 019 | 123714 | SET OF PISTON RING | |
| 020 | 122869 | TORSION DAMPER WITH PULLEY | |
| 020 | 121570 | TORSION DAMPER WITH PULLEY | |
| 020 | 105160 | TORSION DAMPER WITH PULLEY | 2$250–$1,740 |
| 021 | 100476 | SCREW | 2$100 |
| 022 | 102775 | WASHER |
This OEM diagram is the property of Ferrari or its respective rights holder. It is provided free of charge for parts identification, maintenance, and repair purposes, consistent with the principles of Fair Use (17 U.S.C. § 107) and Right to Repair. Legal Disclaimer
