| # | OEM | Part name | Offers |
|---|---|---|---|
| 000 | 95970011 | VACUUM PUMP FOR METERING DEVICE CHECK | |
| 001 | 70000636 | METERING DEVICE | |
| 001 | 121461 | SUPPORT FOR METERING DEVICES, COMPL. | 1$600 |
| 002 | 123117 | SUPPORT FOR METERING DEVICES | |
| 003 | 121088 | GASKET | |
| 005 | 115498 | UNION WITH FILTER. | |
| 006 | 11270160 | GASKET | |
| 007 | 13541021 | STUD | |
| 008 | 102948 | NUT | |
| 009 | 12601271 | WASHER | |
| 010 | 113660 | UNION FOR FUEL DELIVERY TO REGULATOR | |
| 011 | 14330260 | WASHER | |
| 012 | 113980 | THERMO-TIME SWITCH | 4$333–$554 |
| 013 | 115650 | PROTECTION CAP FOR IFLING ADJUSTING SCREW | |
| 014 | 124408 | AIR SENSOR PLATE | |
| 015 | 120809 | SUPPORTING WASHER | |
| 016 | 123134 | PAD | |
| 017 | 123135 | DISTANCHE TUBE | |
| 018 | 106744 | SPRING WASHER | |
| 019 | 102948 | NUT | |
| 020 | 125124 | SWINGING ASSY, OF FUEL RETURN FROM L.H. METERING DEVICE | |
| 020 | 125123 | SWINGING ASSY, OF FUEL RETURN FROM R.H. METERING DEVICE | |
| 021 | 111644 | UNION | |
| 022 | 11270160 | GASKET | |
| 023 | 116772 | L.H. RETURN HOSE | |
| 023 | 126800 | R.H. RETURN HOSE | |
| 024 | 13000190 | CLAMP | |
| 025 | 123728 | SHAPED PIPE FROM R.H. WARM-UP REGULATOR | 32$58–$825 |
| 026 | 113664 | UNION | 1$51 |
| 027 | 14330260 | UNION | |
| 028 | 123736 | SHAPED PIPE FOR CONNECTION OF | |
| 029 | 123738 | FUEL TO WARM-UP REGULATOR DELIVERY PIPE | |
| 030 | 114018 | UNION | |
| 031 | 10260160 | GASKET | |
| 032 | 113664 | UNION | 1$51 |
| 033 | 14330260 | GASKET | |
| 034 | 123744 | DISTRIBUTOR LINES SUPPORTING BRACKET | |
| 035 | 10396580 | WIRE CARRIER | |
| 036 | 113975 | INJECTOR | 17$51–$867 |
| 037 | 113570 | SEAL RING | |
| 038 | 113309 | INJECTOR HOLDING BUSH | 7$95–$154 |
| 039 | 101031 | GARTER RING | |
| 040 | 103326 | STOP RING | |
| 041 | 113979 | COLD START INJECTOR | 5$300–$1,152 |
| 042 | 121056 | INJECTOR CONNECTING UNION | |
| 043 | 103039 | SEAL RING | |
| 044 | 123746 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 2 CYLINDER | 1$169 |
| 044 | 123753 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 9 CYLINDER | 1$214 |
| 044 | 123751 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 7 CYLINDER | 1$216 |
| 044 | 123750 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 6 CYLINDER | 1$211 |
| 044 | 123749 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 5 CYLINDER | 1$203 |
| 044 | 123748 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 4 CYLINDER | |
| 044 | 123756 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 12 CYLINDER | 1$238 |
| 044 | 123755 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 11 CYLINDER | 1$211 |
| 044 | 123754 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 10 CYLINDER | |
| 044 | 123745 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 1 CYLINDER | |
| 044 | 123747 | SHAPED FUEL FROM METERING DEVICE TO INJECTOR OF NO. 3 CYLINDER | 1$232 |
| 045 | 113664 | UNION | 1$51 |
| 046 | 14330260 | COPPER WASHER | |
| 047 | 115595 | 4-WAY PIPE SUPPORTING CLAMP | |
| 048 | 113896 | 3-WAY PIPE SUPPORTING CLAMP | |
| 049 | 117279 | 2-WAY PIPE SUPPORTING CLAMP | |
| 050 | 123781 | SHAPED FUEL PIPE FOR R.H. COLD START | |
| 051 | 113664 | UNION | 1$51 |
| 052 | 14330260 | GASKET | |
| 053 | 125225 | SHAPED PIPE FROM L.H. WARM-UP REGULATOR | |
| 054 | 123783 | SHAPED FUEL PIPE FROM L.H. COLD START | 1$54 |
| 055 | 101030 | GARTER RING | |
| 056 | 123936 | INJECTOR HOLDING BUSH |
This OEM diagram is the property of Ferrari or its respective rights holder. It is provided free of charge for parts identification, maintenance, and repair purposes, consistent with the principles of Fair Use (17 U.S.C. § 107) and Right to Repair. Legal Disclaimer
