| # | OEM | Part name | Offers |
|---|---|---|---|
| 001 | 329-01-00-00 | Cylinder block complete (valid for 4200 c.c. engine) | |
| 001a | 329-01-00-20 | Cylinder block complete (valid for 4900 c.c. engine) | |
| 001b | 433-01-00-20 | Cylinder block complete with new lubrication (valid for 4900 c.c. engine Automatic Transmission) N.B. From Engine No. 8029 -2/10/79 - Car No. 3.300.214 | |
| 001c | 433-01-00-00 | Cylinder block complete with new lubrication (valid for 4900 c.c. engine Gear Transmission) N.B. From Engine No. 8029 -2/10/79 - Car No. 3.300.214 | |
| 001d | MENG049 | Engine 4.9cc - Engine unit | |
| 002 | 420-01-77-00 | Liner for cylinders (valid for 4200 c.c. engine) | |
| 002a | 425-01-01-00 | Liner for inside cylinders (valid for 4900 c.c. engine) | |
| 002b | 425-01-02-00 | Liner for outside cylinders (valid for 4900 c.c. engine) | |
| 003 | 420-01-03-40 | Front main bearing cap with new lubrication (valid for 4900 c.c. engine-Autom. and Gear Transmission) N.B. From Engine No. 8029 -2/10/79 - Car No. 3.300.214 | |
| 003a | 420-01-03-00 | Main bearing cap, center | |
| 004 | 420-01-04-40 | Main bearing cap center (valid for 4900 c.c. engine-Automatic and Gear Transmission) | |
| 004a | 420-01-04-00 | Middle main bearing cap | |
| 005 | 420-01-06-00 | Main bearing cap stud | |
| 006 | 420-01-05-00 | Rear main bearing cap | |
| 006a | 420-01-05-40 | Rear main bearing cap (valid for 4900 c.c. engine-Gear and Automatic Transmission) | |
| 007 | 420-01-08-00 | Cylinder head fixing stud | |
| 008 | 433-01-09-00 | Oil Sump Aut. Transmission compl. With feeler (Valid for 4900c.c. engine) | |
| 008a | 433-01-09-20 | Oil sump with feeler, Gear Transmission (valid for 4200 c.c. and 4900 c.c. engine) | |
| 008b | 420-01-09-20 | Oil sump without feeler | |
| 009 | 420-01-10-20 | Oil sump plate | |
| 010 | 420-01-07-00 | Front main bearing cap stud | |
| 011 | 420-01-16-00 | Oil pipe plug, clutch side | |
| 012 | GN 48059 | Gasket or Seal | |
| 013 | 421-01-11-22 | Cylinder block cover complete | |
| 013a | 421-01-11-21 | Front cover complete with hub and chain stretcher | |
| 013b | 421-01-11-20 | Front cover complete with studs and plug | |
| 014 | 420-01-12-00 | Front cover gasket | |
| 015 | 420-01-13-00 | Front cover oil adjusting dowel | |
| 016 | 424-01-19-00 | Advance timing pointer | |
| 017 | VNT 33020 | Vita 5 x0,8 x 12 fissaggio Indice lettura anticipo accens. | |
| 018 | DNT 77777 | Pointer screw nut 0 5x0.8x4 | |
| 019 | PN 55923 | Threaded Stud | |
| 020 | PN 41864 | Stud | |
| 021 | RAT 45689 | Stud washer 8 | |
| 022 | DNT 47031 | Nut | |
| 023 | RAT 46736 | Washer fixing main bearing caps 12x24x1.2 | |
| 024 | RNT 67081 | Washer 12x24x3 | |
| 025 | DN 47061 | Nut | |
| 026 | GRN 54501 | Grano di centraggio 8 x 24 fra basamento e coppa . | |
| 027 | PN 49099 | Threaded Stud | |
| 028 | RNT 47210 | Washer | |
| 029 | DNT 84252 | Nut | |
| 030 | PN 88608 | Stud fixing oil sump from part to cylinder block 7x1x122 | |
| 031 | DST 67465 | Stud nut 7xlx13,5 | |
| 032 | PN 32424 | Threaded Stud | |
| 033 | RDI 55990 | Washer | |
| 034 | PN 46589 | Threaded Stud | |
| 035 | GRN 50669 | Grano di centraggio 10 x 26 fra testa e basamento . | |
| 036 | PN 32662 | Threaded Stud - Particolare senza numero in calce a sinistra della tavola illustrative | |
| 037 | TN 87242 | Central duct plug 20x1.5x12 | |
| 038 | GN 51444 | Gasket or Seal | |
| 039 | GOM 50315 | Seal ring | |
| 040 | BNT 47016 | Bolt | |
| 041 | RDI 53899 | Washer | |
| 042 | PN 48126 | Threaded Stud | |
| 043 | RNT 32423 | Washer | |
| 044 | RSN 33667 | Washer 11 | |
| 045 | DN 48127 | Nut | |
| 046 | TN 50677 | Tappo 30 x 1,5 sul serbatoio per scarico olio dalla vett. n. 302 | |
| 047 | GN 33367 | Guarnitura 10x40x1 per tappo scarico olio coppa | |
| 048 | PN 89999 | Engine mount stud R.H. & L.H. 10x1.5x35 | |
| 049 | RDI 87239 | Washer 0 10 | |
| 050 | DNT 87236 | Stud nut 10x1.5x8 | |
| 051 | PN 35490 | Threaded Stud | |
| 052 | RAT 84157 | Washer | |
| 053 | RSN 32690 | Washer | |
| 054 | DNT 80338 | Nut | |
| 055 | BNT 54015 | Bolt | |
| 056 | RN 60913 | Washer | |
| 057 | DST 53397 | Nut | |
| 058 | GRN 51124 | Grano 12x8,5x22 per detto | |
| 059 | PN 53525 | Stud, oil pump body and cover | |
| 060 | GRN 55499 | Grano 14 x 11 x34 per detto . | |
| 061 | DST 48923 | Nut | |
| 062 | PN 33921 | Threaded Stud | |
| 063 | RNT 74163 | Washer | |
| 065 | ANT 67794 | Sealing Ring | |
| 066 | GN 47208 | Water plug gasket 10 | |
| 067 | TN 65967 | Tappo 10 x 1,5 x 15,5 scarico acqua dal basamento | |
| 068 | GOM 42229 | Rubber 11x16x2.5 | |
| 069 | TN 44295 | Tappo 6 x1 per fori olio coperchio ant. basamento | |
| 070 | PN 86044 | Stud fixing flywheel housing 8x1.25 | |
| 072 | TN 33915 | Tappo 20 x 1.5 per chiusura foro albero galoppino nel basamento | |
| 073 | GN 33916 | Gasket or Seal | |
| 074 | ANT 43241 | Sealing Ring | |
| 076 | 420-00-58-01 | Gasket, R.H. cyl. head (valid for 4200 c.c. engine) | |
| 076a | 420-00-58-00 | Gasket, R.H. cyl. head (valid for 4900 c.c. engine) | |
| 077 | 420-00-59-01 | Gasket, L.H. cyl. head (valid for 4200 c.c. engine) | |
| 077a | 420-00-59-00 | Gasket, L.H. cyl. head (valid for 4900 c.c. engine) | |
| 078 | 329-26-88-00 | Engine mount, R.H. | |
| 079 | TN 87241 | Water and oil ducts plug 24x1.5 | |
| 080 | 433-04-28-00 | Electric feeler, oil level control | |
| 081 | 433-04-31-00 | Gasket | |
| 083 | BNT 47021 | Bolt | |
| 084 | 329-02-73-00 | Gaskets and rubbers kit for engine overhaul (valid for 4200 c.c. engine) | |
| 084a | 330-03-86-00 | Gaskets and rubbers kit for valves grinding (valid for 4200 c.c. engine) | |
| 084b | 329-03-86-00 | Gaskets and rubbers kit for valves grinding (valid for 4200 c.c. engine) | |
| 084c | 420-01-21-40 | Pin on front main bearing (valid for 4900 c.c. engine Gear Transmission and Automatic Transmission with new lubrication) N.B. From Engine No. 8029 -2/10/79 - Car No. 3.300.214 |
This OEM diagram is the property of Maserati or its respective rights holder. It is provided free of charge for parts identification, maintenance, and repair purposes, consistent with the principles of Fair Use (17 U.S.C. § 107) and Right to Repair. Legal Disclaimer
