| # | OEM | Part name | Offers |
|---|---|---|---|
| 010 | 11M0227CP | BATTERY CABLE - NEGATIVE | 7$59–$125 |
| 011 | 00RA002 | BOLT - M8X20 - HEX | |
| 012 | 22MA347GP | PRE FUSE BOX | 4$67–$175 |
| 013 | 00RA075 | NUT - M8-8 - HEX | |
| 013 | 00RA075 | NUT - M8-8 - HEX | |
| 013 | 00RA075 | NUT - M8-8 - HEX | |
| 013 | 00RA075 | NUT - M8-8 - HEX | |
| 013 | 00RA075 | NUT - M8-8 - HEX | |
| 014 | 00RA555 | NUT - M5X0.8 - HEX LOCKED | |
| 014 | 00RA555 | NUT - M5X0.8 - HEX LOCKED | |
| 015 | 11M1124CP | BUSBAR - RHD 24 | |
| 015 | 11M1124CP | BUSBAR - RHD 24 | |
| 015 | 11M1124CP | BUSBAR - RHD 24 | |
| 015 | 11M0926CP | BUSBAR - LHD | 9$71–$175 |
| 015 | 11M0926CP | BUSBAR - LHD | 9$71–$175 |
| 015 | 11M0926CP | BUSBAR - LHD | 9$71–$175 |
| 016 | 00RA262 | HALF NUT - M8 - DIN 439 | |
| 017 | 00RB060 | P CLIP - DIA 20 | |
| 018 | 00RX003 | BOLT - M6X1X12 - HEX | |
| 019 | 11M0186CP | WIRING HARNESS GND24OOP-RH | |
| 020 | 00RA344 | SCREW - HEX - FLANGE - M8X16 - 8.8 | |
| 020 | 00RA344 | SCREW - HEX - FLANGE - M8X16 - 8.8 | |
| 020 | 00RA344 | SCREW - HEX - FLANGE - M8X16 - 8.8 | |
| 021 | 11M0185CP | WIRING HARNESS GND24OOP-LH | |
| 022 | 14MA628CP | WIRING HARNESS - STARTER MOTOR - INC. CARRIER | 4$113–$250 |
| 023 | 00RA556 | BOLT - HEX - FLANGED - M6X16 | |
| 024 | 00RC013 | WASHER - M6X18X1.6 | |
| 025 | 11M0743CP | BUSBAR RETENTION PLATE | |
| 026 | 11M0779CP | BUSBAR RETENTION PLATE AFT - REAR | |
| 027 | 13MA183CP | ENGINE GROUND STRAP | 3$75–$154 |
| 028 | 00RA367 | PIPE PROTECTOR - 19MM ID |
This OEM diagram is the property of McLaren or its respective rights holder. It is provided free of charge for parts identification, maintenance, and repair purposes, consistent with the principles of Fair Use (17 U.S.C. § 107) and Right to Repair. Legal Disclaimer
